GTO OEM (Holden) Key Fob With Replacement Buttons

Brand NEW OEM key fob for the 2004-2006 Pontiac GTO.  These fobs are identical to the Pontiac fob except they have the Holden logo on the back. The Pontiac fob is discontinued 

We received some Holden fobs with defective buttons; however, we were able to remove the original buttons without separating the housing and install replacement buttons.  These fobs are 100% in working condition and are tested before we ship them out.  You will have your choice of color, black, blue or red to match your GTO interiors. These fobs come in a few different configurations as shown below:

Fob only

Fob with OEM screws

Fob with aftermarket blank/screws  (Shown without replacement buttons, they will be replaced with color of choice)

Fob with OEM blank/screws (Shown without replacement buttons, they will be replaced with color of choice)

Also, each fob will also receive a set of replacement buttons in case you ever have to replace one down the road. 

Programming Transmitters Without Tech 2
- Turn the ignition to ON, then wait 10 minutes for the next step in the programming sequence.
- After the 10 minutes has elapsed, the car horn will chirp once. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
- Leave the key to the ON position for 10 minutes. After the 10 minutes has elapsed, the car horn will chirp twice. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
- Leave the key to the ON position for 10 minutes. After the 10 minutes has elapsed, the car horn will chirp 3 times.
- Verify that the security indicator in the instrument cluster has stopped flashing and attempt to start the vehicle.
- Turn the ignition to OFF and remove the key from the ignition switch.
- Move approximately 3 meters (10 ft) away from the vehicle and test the transmitter functions to validate that the transmitter has been programmed successfully.